Menu
Trowel applied, glass flake reinforced COROFLAKE series linings are available in several base resin formulations for the protection of steel substrates in immersion service. These linings exhibit excellent chemical and permeation resistance. The linings are typically applied in a minimum two coats over primer to achieve a target thickness of 80 mils (2.0 mm) DFT with a range of 60-120 mils (1.5-3.0 mm) DFT. COROFLAKE trowel applied linings can be used in chemical immersion services at temperatures up to 200°F (93°C).
COROFLAKE 14 VE is a two component, glass flake filled, trowel applied, Vinyl Ester lining system. It consists of a primer and a minimum two coats of COROFLAKE 14 VE. Higher lining thickness or number of coats may be recommended depending on service conditions. COROFLAKE 14 VE. meets compliance requirements of FDA 21 CFR 175.300 for repeated direct food contact.
COROFLAKE 18 NVE is a two component, glass flake filled, trowel applied, Novolac Vinyl Ester lining system. It consists of a primer and a minimum two coats of COROFLAKE 18 NVE. Higher lining thickness or number of coats may be recommended depending on chemical and service conditions.