COROCAST EN
Epoxy Novolac Polymer Concrete
COROCAST EN is a three component, 100% solids Epoxy Novolac polymer concrete material used for new construction and repair of concrete structures. It consists of a primer and the mixture of COROCAST EN Resin and Hardener, COROCAST PC Aggregate and pea gravel. It can be used as a cast-in-place material or trowel applied mortar.
COROCAST EP
Epoxy Polymer Concrete
COROCAST EP is a three component, 100% solids Epoxy polymer concrete material used for new construction and repair of concrete structures. It consists of a primer and the mixture of COROCAST EP Resin and Hardener, COROCAST PC Aggregate and pea gravel. It can be used as a cast-in-place material or trowel applied mortar.
COROCAST VE
Vinyl Ester Polymer Concrete
COROCAST VE is a three component, Vinyl Ester polymer concrete material used for new construction and repair of concrete structures. It consists of a primer and the mixture of COROCAST E Resin and Hardener, COROCAST PC Aggregate and pea gravel. It can be used as a cast-in-place material or trowel applied mortar.
COROFLAKE 14 VE
Trowel Applied Glass Flake Vinyl Ester Lining
COROFLAKE 14 VE is a two component, glass flake filled, trowel applied, Vinyl Ester lining system. It consists of a primer and a minimum two coats of COROFLAKE 14 VE. Higher lining thickness or number of coats may be recommended depending on service conditions. COROFLAKE 14 VE. meets compliance requirements of FDA 21 CFR 175.300 for repeated direct food contact.
COROFLAKE 18 NVE
Trowel Applied Glass Flake Novolac Vinyl Ester Lining
COROFLAKE 18 NVE is a two component, glass flake filled, trowel applied, Novolac Vinyl Ester lining system. It consists of a primer and a minimum two coats of COROFLAKE 18 NVE. Higher lining thickness or number of coats may be recommended depending on chemical and service conditions.
COROFLAKE 23 NVE
Inert Flake Filled Novolac Vinyl Ester Coating
COROFLAKE 23 NVE is a two-component, inert flake filled Novolac Vinyl Ester coating/lining system. It consists of a primer and a minimum two coats of COROFLAKE 23 NVE applied at 15-20 mils (375-500 µm) DFT per coat.
COROFLAKE 23C MR
Fabric Reinforced Graphite Flake Novolac Vinyl Ester Lining
COROFLAKE 23C MR is a fiberglass mat or synthetic fabric reinforced, chemical resistant lining based on Novolac Vinyl ester resin and incorporating a graphite filled topcoat. The lining system consists of a primer, trowel applied basecoat, reinforcement layer and a minimum of one COROFLAKE 23C NVE topcoat.
COROFLAKE 23C NVE
Graphite Flake Filled Novolac Vinyl Ester Coating
COROFLAKE 23C NVE is a two-component, conductive, graphite filled Novolac Vinyl Ester coating/lining system. It consists of a primer and normally two coats of COROFLAKE 23C NVE applied at 15-20 mils (375-500 µm) DFT per coat. It can also be used as a topcoat over other Novolac Vinyl Ester lining and coating systems.
COROFLAKE 23HB NVE
High Build Flake Filled Novolac Vinyl Ester Coating
COROFLAKE 23HB NVE is a two-component inert flake filled, high build coating/lining based on Novolac Vinyl Ester resin. The coating/lining system generally consists of a primer and minimum one coat of COROFLAKE 23HB NVE. Primer may be optional when coating metal surfaces.
COROFLAKE 23LSE NVE
Low Surface Energy Novolac Vinyl Ester Topcoat
COROFLAKE 23LSE NVE is a two-component, Novolac Vinyl Ester topcoat incorporating PTFE fillers to provide a low surface energy finish with a degree of non-stick properties. It is applied at 15-20 mils (375-500 µm) DFT as a topcoat over a wide range of Novolac Vinyl Ester lining and coating systems.
COROFLAKE 23 MR
Mat Reinforced Flake Filled Novolac Vinyl Ester Lining
COROFLAKE 23 MR is a fiberglass mat reinforced, chemical resistant lining based on Novolac Vinyl Ester resin and incorporating an inert flake filled topcoat. The lining system consists of a primer, trowel applied basecoat, fiberglass mat reinforcement and a minimum of one COROFLAKE 23 NVE topcoat.
COROFLAKE 24 VE
Inert Flake Filled Vinyl Ester Coating
COROFLAKE 24 VE is a two-component, inert flake filled, Vinyl Ester coating/lining system. It consists of a primer and a minimum two coats of COROFLAKE 24 VE applied at 15-20 mils (375-500 µm) DFT per coat. COROFLAKE 24 VE meets compliance requirements of FDA 21 CFR 175.300 for repeated direct food contact.
COROFLAKE 24AR VE
Abrasion Resistant Vinyl Ester Topcoat
COROFLAKE 24AR VE is two-component, abrasion resistant Vinyl Ester topcoat incorporating abrasion resistant fillers to improve wear resistance. It is applied at 15-20 mils (375-500 µm) DFT as a topcoat over a wide range of Vinyl Ester lining and coating systems.
COROFLAKE 24C MR
Fabric Reinforced Graphite Flake Vinyl Ester Lining
COROFLAKE 24C MR is a fiberglass mat or synthetic fabric reinforced, chemical resistant lining based on Vinyl ester resin and incorporating a graphite filled topcoat. The lining system consists of a primer, trowel applied basecoat, reinforcement layer and a minimum of one COROFLAKE 24C VE topcoat.
COROFLAKE 24C VE
Graphite Flake Filled Vinyl Ester Coating
COROFLAKE 24C VE is a two-component, conductive, graphite filled Vinyl Ester coating/lining system. It consists of a primer and normally two coats of COROFLAKE 24C VE applied at 15-20 mils (375-500 µm) DFT per coat. It can also be used as a topcoat over other Vinyl Ester lining and coating systems.
COROFLAKE 24HB VE
High Build Flake Filled Vinyl Ester Coating
COROFLAKE 24HB VE is a two-component inert flake filled, high build coating/lining based on Vinyl Ester resin. The coating/lining system generally consists of a primer and minimum one coat of COROFLAKE 24HB VE. Primer may be optional when coating metal surfaces.
COROFLAKE 24LSE VE
Low Surface Energy Vinyl Ester Topcoat
COROFLAKE 24LSE VE is a two-component, Vinyl Ester topcoat incorporating PTFE fillers to provide a low surface energy finish with a degree of non-stick properties. It is applied at 15-20 mils (375-500 µm) DFT as a topcoat over a wide range of vinyl ester lining and coating systems. COROFLAKE 24LSE VE meets compliance requirements of FDA 21 CFR 175.300 for repeated direct food contact.
COROFLAKE 24 MR
Mat Reinforced Flake Filled Vinyl Ester Lining
COROFLAKE 24 MR is a fiberglass mat reinforced, chemical resistant lining based on Vinyl Ester resin and incorporating an inert flake filled topcoat. The lining system consists of a primer, trowel applied basecoat, fiberglass mat reinforcement and a minimum of one COROFLAKE 24 VE topcoat. COROFLAKE 24 VE topcoat meets compliance requirements of FDA 21 CFR 175.300 for repeated direct food contact.
COROFLAKE 26 CP
Inert Flake Filled Chlorendic Polyester Coating
COROFLAKE 26 CP is a two-component, inert flake filled coating system based on a Chlorendic Polyester resin. It consists of a primer and a minimum two coats of COROFLAKE 26 CP applied at 15-20 mils (375-500 µm) DFT per coat.
COROFLAKE 28 MR
Mat Reinforced Glass Flake Novolac Vinyl Ester Lining
COROFLAKE 28 MR is a fiberglass mat reinforced, chemical resistant lining based on Novolac Vinyl Ester resin and incorporating a glass flake filled topcoat. The lining system consists of a primer, trowel applied basecoat, fiberglass mat reinforcement and a minimum of one COROFLAKE 28 NVE topcoat.
COROFLAKE 28 NVE
Glass Flake Filled Novolac Vinyl Ester Coating
COROFLAKE 28 NVE is a two-component, glass flake filled coating/lining system based on Novolac Vinyl Ester resin. It consists of a primer and a minimum two coats of COROFLAKE 28 NVE applied at 15-20 mils (375-500 µm) DFT per coat.
COROFLAKE 28AR NVE
Abrasion Resistant Novolac Vinyl Ester Topcoat
COROFLAKE 28AR NVE is two-component, abrasion resistant Novolac Vinyl Ester topcoat incorporating abrasion resistant fillers to improve wear resistance. It is applied at 15-20 mils (375-500 µm) DFT as a topcoat over COROFLAKE 28 NVE and other Novolac Vinyl Ester lining and coating systems.
COROFLAKE 28HB NVE
High Build Glass Flake Novolac Vinyl Ester Coating
COROFLAKE 28HB NVE is a two-component glass flake filled, high build coating/lining based on Novolac Vinyl Ester resin. The coating/lining system generally consists of a primer and minimum one coat of COROFLAKE 28HB NVE. Primer may be optional when coating metal surfaces.
COROFLAKE 28LSE NVE
Low Surface Energy Novolac Vinyl Ester Topcoat
COROFLAKE 28LSE NVE is a two-component, Novolac Vinyl Ester topcoat incorporating PTFE fillers to provide a low surface energy finish with a degree of non-stick properties. It is applied at 15-20 mils (375-500 µm) DFT as a topcoat over a wide range of Novolac Vinyl Ester lining and coating systems.
COROFLAKE 31 NVE
Inert Flake Filled Novolac Vinyl Ester Coating
COROFLAKE 31 NVE is a two-component, inert flake filled Novolac Vinyl Ester resin based coating system. The coating system typically consists of a primer and a minimum two coats of COROFLAKE 31 NVE applied at 8-10 mils (200-250 µm) DFT per coat.
COROFLAKE 32 VE
Inert Flake Filled Vinyl Ester Coating
COROFLAKE 32 VE is a two-component; inert flake filled Vinyl Ester resin based coating/lining system. The coating system typically consists of a primer and a minimum two coats of COROFLAKE 32 VE applied at 8-10 mils (200-250 µm) DFT per coat.
COROFLAKE 34HB VE
High Build Glass Flake Vinyl Ester Coating
COROFLAKE 34HB VE is a two-component glass flake filled, high build coating/lining based on Vinyl Ester resin. The coating/lining system generally consists of a primer and minimum one coat of COROFLAKE 34HB VE. Primer may be optional when coating metal surfaces.
COROFLAKE 34 VE
Glass Flake Filled Vinyl Ester Coating
COROFLAKE 34 VE is a two-component, glass flake filled Vinyl Ester coating/lining system. It consists of a primer and a minimum two coats of COROFLAKE 34 VE applied at 15-20 mils (375-500 µm) DFT per coat. COROFLAKE 34 VE meets compliance requirements of FDA 21 CFR 175.300 for repeated direct food contact.
COROFLAKE 67 MR
Mat Reinforced Crack-Bridging Epoxy Lining
COROFLAKE 67 MR is a fiberglass mat reinforced, chemical resistant, crack-bridging lining based on Epoxy resin. The system consists of a primer, a trowel applied basecoat, fiberglass mat reinforcement and a spray or roller applied topcoat. Various epoxy and Epoxy Novolac topcoat options are available depending on specific service conditions.
COROFLAKE 67PS PRIMER
Multi-Purpose Epoxy Primer / Saturant
COROFLAKE 67PS PRIMER a low viscosity two-component concrete and steel primer/saturant based on a high grade Epoxy resin. It will hold abrasive blasted steel surfaces against rusting until protective epoxy or epoxy novolac coatings and linings are applied. When applied to properly prepared concrete it will effectively seal and strengthen the surface and improve adhesion with subsequently applied compatible coating, lining and flooring materials.
COROFLAKE 70 PRIMER
COROFLAKE 70 PRIMER is a two-component, low viscosity, high solids Epoxy primer for concrete substrates. The primer exhibits a degree of surface moisture tolerance and improved resistance to hydrostatic pressure compared to standard epoxy primers. It will effectively seal and strengthen concrete surfaces to improve the adhesion with subsequent with subsequent coating, lining and flooring systems.
COROFLAKE 71 PRIMER
Oil Tolerant Epoxy Primer
COROFLAKE 71 PRIMER a low viscosity, 100% solids, two-component concrete primer based on high grade Epoxy resin and proprietary hardener. It will effectively seal and strengthen the surface and improve adhesion with subsequently applied compatible coating, lining and flooring materials. COROFLAKE 71 PRIMER has very good tolerance for surface oils and moisture.
COROFLAKE 200 EN
High Performance Epoxy Novolac Glass Flake Coating
COROFLAKE 200 EN is a two-component, 100% solids, glass flake filled Epoxy Novolac coating/lining system. It consists of a primer and minimum two coats of COROFLAKE 200 EN applied at 15-20 mils (375-500 µm) DFT per coat. It provides excellent chemical resistance including exposure to 98% sulfuric acid.
COROFLAKE 200 MR
Mat Reinforced High Performance Epoxy Novolac Lining
COROFLAKE 200 MR is a fiberglass mat reinforced chemical resistant lining based on high functionality Epoxy Novolac resin technology. The lining system consists of a primer, trowel applied basecoat, one layer of fiberglass mat reinforcement and a minimum of one flake filled COROFLAKE 200 EN topcoat.
COROFLAKE 224AR VE
NSF 61 Certified Ceramic Filled Abrasion Resistant Vinyl Ester Coating
COROFLAKE 224AR VE is a ceramic filled abrasion resistant vinyl ester coating. It is UL certified for use in tanks ≥ 200 USG for products in direct potable water contact according to: ANSI/NSF 61, ANSI/NSF 61 Annex G, NSF 372 and NSF/ANSI/CAN 600. It provides extreme abrasion resistance, making it a great choice in water filtration systems, potable water vessels, water treatment equipment, OTR transport trailers, rail cars, etc. This product can provide major cost savings as it can be applied in just one coat, and it has an accelerated cure time of 1 hour at 160°F, allowing you back to production fast.
COROFLAKE 266 EN
Glass Flake Filled Epoxy Novolac Coating
COROFLAKE 266 EN is a two-component, 100% solids, glass flake filled Epoxy Novolac coating/lining system. It consists of a primer and minimum two coats of COROFLAKE 266 EN applied at 15-20 mils (375-500 µm) DFT per coat. It provides very good chemical resistance to sulfuric acid up to 98% for secondary containment and splash/spill conditions.
COROFLAKE 266 MR
Mat Reinforced Glass Flake Epoxy Novolac Lining
COROFLAKE 266 MR is a fiberglass mat reinforced chemical resistant lining based on Epoxy Novolac resin. The lining system consists of a primer, trowel applied basecoat, one layer of fiberglass mat reinforcement and a minimum of one flake filled COROFLAKE 266 EN topcoat.
COROFLAKE 266AR EN
Abrasion Resistant Epoxy Novolac Topcoat
COROFLAKE 266AR EN is a two-component, 100% solids, abrasion resistant Epoxy Novolac topcoat incorporating abrasion resistant fillers to improve wear resistance. It is applied at 15-20 mils (375-500 µm) DFT as a topcoat over COROFLAKE 266 EN and other Epoxy Novolac lining and coating systems.
COROFLAKE 266LSE EN
Low Surface Energy Epoxy Novolac Topcoat
COROFLAKE 266LSE EN is a two-component, Epoxy Novolac topcoat incorporating PTFE fillers to provide a low surface energy finish with a degree of non-stick properties. It is applied at 15-20 mils (375-500 µm) DFT as a topcoat over compatible epoxy and epoxy novolac lining coating systems.
COROFLAKE 611 EP
High Solids Flake Filled Epoxy Coating
COROFLAKE 611 EP is a two-component, high solids, inert flake filled Epoxy coating system. It is moisture tolerant and has low temperature cure capabilities. It consists of a primer and minimum two coats of COROFLAKE 611 EP applied at 6-8 mils (150-200 µm) DFT per coat.
COROFLAKE 611LSE EP
Low Surface Energy High Solids Epoxy Topcoat
COROFLAKE 611LSE EP is a two-component, high solids Epoxy topcoat incorporating PTFE fillers to provide a low surface energy finish with a degree of non-stick properties. It is applied at 6-8 mils (150-200 µm) DFT as a topcoat over COROFLAKE 611 EP and other Epoxy lining and coating systems.
COROFLAKE 620HB EP
High Build Glass Flake Epoxy Coating
COROFLAKE 620HB EP is a two-component glass flake filled, high build coating/lining based on Epoxy resin. The coating/lining system generally consists of a primer and minimum one coat of the COROFLAKE 620HB EP. Primer may be optional when coating metal surfaces.
COROFLAKE 1424 VE
Trowel-Spray Flake Filled Vinyl Ester Lining
COROFLAKE 1424 VE is a flake filled Vinyl Ester lining system. It consists of a primer, a trowel applied, glass flake filled basecoat and a spray or roller applied inert flake filled topcoat. One or two topcoats may be required depending on the chemical and service conditions. COROFLAKE 1424 VE meets compliance requirements of FDA 21 CFR 175.300 for repeated direct food contact.
COROFLAKE 1434 VE
Trowel-Spray Glass Flake Vinyl Ester Lining
COROFLAKE 1434 VE is a glass flake filled Vinyl Ester lining system. It consists of a primer, a trowel applied, glass flake filled basecoat and a spray applied glass flake filled topcoat. One or two topcoats may be required depending on the chemical and service conditions. COROFLAKE 1434 VE. meets compliance requirements of FDA 21 CFR 175.300 for repeated direct food contact.
COROFLAKE 1823 NVE
Trowel-Spray Flake Filled Novolac Vinyl Ester Lining
COROFLAKE 1823 NVE is a flake filled Novolac Vinyl Ester lining system. It consists of a primer, a trowel applied glass flake filled basecoat and a spray or roller applied inert flake filled topcoat. One or two topcoats may be required depending on the chemical and service conditions.
COROFLAKE 1828 VE
Trowel-Spray Glass Flake Novolac Vinyl Ester Lining
COROFLAKE 1828 VE is a glass flake filled Novolac Vinyl Ester lining system. It consists of a primer, a trowel applied, glass flake filled basecoat and a spray applied glass flake filled topcoat. One or two topcoats may be required depending on the chemical and service conditions.
COROFLAKE S PRIMER U
High Temperature Novolac Vinyl Ester Primer
COROFLAKE S PRIMER U is a low viscosity, two-component Novolac Vinyl Ester primer. It is used to protect abrasive blasted steel surfaces from rust formation until subsequent Novolac Vinyl Ester protective coating or lining layers are applied. It can also be used as a fiberglass mat saturant resin.
COROFLAKE N PRIMER U
Multi-Purpose Vinyl Ester Primer / Saturant
COROFLAKE N PRIMER U is a Vinyl Ester primer used on concrete and steel substrates in conjunction with Vinyl Ester, Novolac Vinyl Ester and Polyester resin based coatings, linings and flooring systems. It can also be used as a fiberglass mat saturant resin.
COROFLEX LININGS
High Performance Crack-Bridging Lining Systems
COROFLEX LININGS consist of a series of high performance, crack-bridging systems designed to tolerate crack movement in concrete while providing protection against exposure to corrosive chemicals. COROFLEX BC is the flexible elastomeric basecoat membrane used in all COROFLEX LINING system designs. The reinforcement layer consists of fiberglass mat and either an epoxy or vinyl ester resin saturant depending on the specific chemical containment requirements. Topcoat selection is dependent on specific chemical resistance and service condition requirements. Topcoats are available in Epoxy, Epoxy Novolac, Chlorendic Polyester, Vinyl Ester and Novolac Vinyl Ester base resin formulations.
COROFLOOR EN
High Performance Epoxy Novolac Resin Flooring
COROFLOOR EN is a high performance, chemical resistant flooring system based on 100% solids Epoxy Novolac resin. This two component resin system can be applied as a standalone coating, a broadcast or slurry broadcast flooring, and as a heavy-duty floor topping applied by hand or power trowel.
COROFLOOR EP
High Performance Epoxy Resin Flooring
COROFLOOR EP is a high performance, chemical resistant flooring system based on 100% solids Epoxy resin. This two component resin system can be applied as a standalone coating, a broadcast or slurry broadcast flooring, and as a heavy-duty floor topping applied by hand or power trowel.
COROFLOOR NVE
High Performance Novolac Vinyl Ester Resin Flooring
COROFLOOR NVE is a high performance, chemical resistant flooring system based on Novolac Vinyl Ester resin. This two component resin system can be applied as a standalone coating, a broadcast or slurry broadcast flooring, and as a heavy-duty trowel applied floor topping.
COROFLOOR VE
High Performance Vinyl Ester Resin Flooring
COROFLOOR VE is a high performance, chemical resistant flooring system based on Vinyl Ester resin. This two component resin system can be applied as a standalone coating, a broadcast or slurry broadcast flooring, and as a heavy-duty floor topping.
COROGARD 66 EP
100% Solids Flake Filled Epoxy Coating
COROGARD 66 EP is a two-component, 100% solids, flake filled Epoxy coating system. This system consists of a primer and minimum two coats of COROGARD 66 EP applied at 6-8 mils (150-200 µm) DFT per coat.
COROGARD 66LSE EP
Low Surface Energy 100% Solids Epoxy Topcoat
COROGARD 66LSE is a two-component, 100% solids Epoxy topcoat incorporating PTFE fillers to provide a low surface energy finish with a degree of non-stick properties. It is applied at 6-8 mils (150-200 µm) DFT as a topcoat over COROGARD 66 EP and other Epoxy lining and coating systems.
COROGARD 77 EN
High Performance Low Build Epoxy Novolac Coating
COROGARD 77 EN is a two-component, 100% solids, high functionality Epoxy Novolac coating. This system consists of a primer and minimum two coats of COROGARD 77 EN applied at 6-8 mils (150-200 µm) DFT per coat.
COROGARD 77 VT EN
High Performance Variable Thickness Epoxy Novolac Coating
COROGARD 77-VT EN is a two-component, 100% solids, high functionality Epoxy Novolac coating. COROGARD 77-VT EN is used to protect steel and concrete structures that are exposed to a wide range of hydrocarbons, petroleum products, salts, acids, alkalis and many solvents. It is ideally suited as a lining in steel process and storage tanks, cargo tankers and trailers, and as a protective coating for structural steel, concrete containment areas and process floors.
COROGARD 615 EP
Surface Tolerant Epoxy Coating/Primer for Steel
COROGARD 615 EP is a two-component, flake filled, surface tolerant Epoxy coating. It is applied at 6-8 mils (150-200 µm) DFT per coat as a stand-alone coating or as a surface tolerant primer under compatible Epoxy and Epoxy Novolac COROFLAKE and COROGARD systems. COROGARD 615 EP can be applied to rusted surfaces or most existing well bonded coatings.
COROGROUT EN
Epoxy Novolac Equipment Grout
COROGROUT EN is a 100% solids, three-component, high performance Epoxy Novolac grouting material consisting of resin, hardener and aggregate. It is designed to provide support for equipment where chemical spills are present. It resists alkalis, oils and lubricants and many types of acids. It exhibits excellent resistance to 98% sulfuric acid and all concentrations of sodium hydroxide.
COROGROUT EP
High Strength Epoxy Equipment Grout
COROGROUT EP is a three-component, high performance Epoxy grouting material designed to provide support for equipment requiring precision alignment and corrosion protection. It is designed to provide a unique balance of critical performance factors including high flow, good bearing area, high strength, low creep, high temperature resistance, and good adhesion to concrete and steel.
COROGROUT VE
Vinyl Ester Equipment Grout
COROGROUT VE is a three-component, chemical resistant machinery grout based on Vinyl Ester resin. It is designed to provide support for equipment where chemical spills are present. It resists a broad range of chemicals including inorganic and organic acids, bleach solutions, alkalis, oils and salts.
COROJOINT 3
Elastomeric Epoxy Novolac Joint Sealant
COROJOINT 3 is a two component Epoxy Novolac resin based, pourable grade elastomeric joint sealant material cured with a modified polyamine. This joint sealant is available in two consistencies. COROJOINT 3 PR is a pour grade for horizontal surface applications. COROJOINT 3 TR is a trowel grade version for vertical applications.
COROJOINT 5
Polysulfide Elastomeric Joint Sealant
COROJOINT 5 is a two component Polysulfide elastomeric joint sealant material. It has good chemical resistance and is designed for use in expansion joints, control joints and cracks. This joint sealant is available in two consistencies. COROJOINT 5 PR is the pour grade material and COROJOINT 5 TR is a trowel grade version.
COROPATCH 21 VE
Vinyl Ester Patch/Fill Compound
COROPATCH 21 VE is a two-component Vinyl Ester resin based surface fill and patching material. It is designed to fill voids, air pockets, cracks, pits, pinholes and defects on concrete or steel substrates prior to the application of compatible polyester, vinyl ester and novolac vinyl ester coatings, linings and flooring systems.
COROPATCH 61 EP
Epoxy Patch/Fill Compound
COROPATCH 61 EP is a two-component 100% solids Epoxy resin based surface fill and patching material. It is designed to fill voids, air pockets, cracks, pits, pinholes and defects on concrete or steel substrates prior to the application of compatible epoxy and epoxy novolac coatings, linings and flooring systems.
COROWEAR EN CERAMIC COMPOUND
Epoxy Novolac Polymer Wear Resistant Compound
COROWEAR EN is a two component, 100% solids, polymer wear resistant compound based on Epoxy Novolac resin technology. Its design incorporates a proprietary blend of densely packed ceramic beads to optimize the protection of surfaces exposed to wear and abrasive conditions. V-1 Filler is an optional thixotropic fiber component that is also included in the standard COROWEAR EN kit packaging. It is added to the resin and hardener mixture when increased sag/slump resistance at higher build thicknesses is desired.
LINING 64 CP
Heavy Duty Chlorendic Polyester Laminate Lining
LINING 64 CP is a heavy duty fiberglass reinforced laminate lining based on Chlorendic Polyester resin. This system consists of a primer, one trowel applied basecoat, two layers of fiberglass mat, one surface veil, and two resin topcoats.
LINING 65 VE
Heavy Duty Vinyl Ester Laminate Lining
LINING 65 VE is a heavy duty fiberglass reinforced laminate lining based on Vinyl Ester resin. This system consists of a primer, one trowel applied basecoat, two layers of fiberglass mat, one surface veil, and two resin topcoats.
LINING 74 NVE
Heavy Duty Novolac Vinyl Ester Laminate Lining
LINING 74 NVE is a heavy duty fiberglass reinforced laminate lining based on Novolac Vinyl ester resin. This system consists of a primer, one trowel applied basecoat, two layers of fiberglass mat, one surface veil, and two resin topcoats.
TOPLINE 288 AR
Trowel Applied Reinforced Abrasion Resistant Epoxy Novolac Lining
TOPLINE 288 AR is a trowel applied, fiberglass mat reinforced, chemical and abrasion resistant lining based on Epoxy Novolac resin. The system consists of a primer, a trowel applied basecoat, fiberglass mat reinforcement and a trowel applied abrasion resistant topcoat.
TOPLINE 288 C
Trowel Applied Reinforced Carbon Filled Epoxy Novolac Lining
TOPLINE 288 C is a trowel applied, fiberglass mat or synthetic fabric reinforced, carbon filled chemical resistant lining based on Epoxy Novolac resin. The system consists of a primer, a trowel applied basecoat, fiberglass mat or synthetic fabric reinforcement and a trowel applied carbon filled topcoat.
TOPLINE 288 EN
Trowel Applied Reinforced Epoxy Novolac Lining
TOPLINE 288 EN is a trowel applied, fiberglass mat reinforced, chemical resistant lining based on Epoxy Novolac resin. The system consists of a primer, a trowel applied basecoat, fiberglass mat reinforcement and a trowel applied topcoat.
TOPLINE 505 AR
Trowel Applied Reinforced Abrasion Resistant Epoxy Lining
TOPLINE 505 AR is a trowel applied, fiberglass mat reinforced, chemical and abrasion resistant lining based on modified Epoxy resin. The system consists of a primer, a trowel applied basecoat, fiberglass mat reinforcement and a trowel applied abrasion resistant topcoat.
TOPLINE 505 C
Trowel Applied Reinforced Carbon Filled Epoxy Lining
TOPLINE 505 C is a trowel applied, fiberglass mat or synthetic fabric reinforced, carbon filled chemical resistant lining based on Epoxy resin. The system consists of a primer, a trowel applied basecoat, fiberglass mat or synthetic fabric reinforcement and a trowel applied carbon filled topcoat.
TOPLINE 505 EP
Trowel Applied Reinforced Epoxy Lining
TOPLINE 505 EP is a trowel applied, fiberglass mat reinforced, chemical resistant lining based on modified Epoxy resin. The system consists of a primer, a trowel applied basecoat, fiberglass mat reinforcement and a trowel applied topcoat.
TOPLINE 640 C
Trowel Applied Reinforced Carbon Filled Chlorendic Polyester Lining
TOPLINE 640 C is a trowel applied, fiberglass mat or synthetic fabric reinforced, carbon filled chemical resistant lining based on Chlorendic Polyester resin. The system consists of a primer, a trowel applied basecoat, fiberglass mat or synthetic fabric reinforcement and a trowel applied carbon filled topcoat.
TOPLINE 640 CP
Trowel Applied Reinforced Chlorendic Polyester Lining
TOPLINE 640 CP is a trowel applied, fiberglass mat reinforced lining based on Chlorendic Polyester resin. The system consists of a primer, a trowel applied basecoat, fiberglass mat reinforcement and a trowel applied topcoat.
TOPLINE 664 AR
Trowel Applied Reinforced Abrasion Resistant Vinyl Ester Lining
TOPLINE 664 AR is a trowel applied, fiberglass mat reinforced, chemical and abrasion resistant lining based on Vinyl Ester resin. The system consists of a primer, a trowel applied basecoat, fiberglass mat reinforcement and a trowel applied abrasion resistant topcoat.
TOPLINE 664 C
Trowel Applied Reinforced Carbon Filled Vinyl Ester Lining
TOPLINE 664 C is a trowel applied, fiberglass mat or synthetic fabric reinforced, carbon filled chemical resistant lining based on Vinyl Ester resin. The system consists of a primer, a trowel applied basecoat, fiberglass mat or synthetic fabric reinforcement and a trowel applied carbon filled topcoat.
TOPLINE 664 VE
Trowel Applied Reinforced Vinyl Ester Lining
TOPLINE 664 VE is a trowel applied, fiberglass mat reinforced, chemical resistant lining based on Vinyl Ester resin. The system consists of a primer, a trowel applied basecoat, fiberglass mat reinforcement and a trowel applied topcoat.
TOPLINE 665 AR
Trowel Applied Reinforced Abrasion Resistant Novolac Vinyl Ester Lining
TOPLINE 665 AR is a trowel applied, fiberglass mat reinforced, chemical and abrasion resistant lining based on Novolac Vinyl Ester resin. The system consists of a primer, a trowel applied basecoat, fiberglass mat reinforcement and a trowel applied abrasion resistant topcoat.
TOPLINE 665 C
Trowel Applied Reinforced Carbon Filled Novolac Vinyl Ester Lining
TOPLINE 665 C is a trowel applied, fiberglass mat or synthetic fabric reinforced, carbon filled chemical resistant lining based on Novolac Vinyl Ester resin. The system consists of a primer, a trowel applied basecoat, fiberglass mat or synthetic fabric reinforcement and a trowel applied carbon filled topcoat.
TOPLINE 665 NVE
Trowel Applied Reinforced Novolac Vinyl Ester Lining
TOPLINE 665 NVE is a trowel applied, fiberglass mat reinforced, chemical resistant lining based on Novolac Vinyl Ester resin. The system consists of a primer, a trowel applied basecoat, fiberglass mat reinforcement and a trowel applied topcoat. The total thickness of the lining system is 120-160 mils (3.0-4.0 mm) DFT.